RoomRacer
RigsPartsNewsHow we rate
Build in 3D

RoomRacer is reader-supported. Some links on this site are affiliate links: when you buy through them we may earn a commission, at no extra cost to you. It never changes a rating or which parts go in a rig. As an Amazon Associate we earn from qualifying purchases.

Ratings are AI analysis of public information, not hands-on reviews. Prices are estimates; the retailer's price is the one that counts.

RigsPartsNewsHow we rateAffiliate disclosurePrivacy

RoomRacer · Sim racing rigs designed in our garage · United States

  1. Parts
  2. Pedals
  3. T3PM (T248 (Xbox))

Thrustmaster · set of pedals

Thrustmaster T3PM Pedals (bundled with T248 (Xbox))

Three-pedal magnetic set bundled with the T248 (Xbox), plugged into the wheel base

Thrustmaster's three-pedal T3PM set bundled with the T248 (Xbox), using magnetic Hall-effect sensors and a brake with four firmness settings. Accurate and wear-free, but light and travel-based compared with a load cell.

AI rating

63

Fine, with caveats for a set of pedals at this price. Best for: A first-time Thrustmaster owner who wants three accurate pedals in the box.

Brake feel
5
Consistency
7
Adjustability
6
Build quality
5
Value
7

Who it suits

First rig
8
Console racing
8
Competitive racing
4
Small rooms
7
Tight budgets
7
Enthusiasts
2

Scores are AI analysis of public information (specs, manuals, published reviews and owner reports), not a hands-on test. How we rate

Pros and cons

  • Hall-effect (H.E.A.R.T.) sensors don't wear or spike like potentiometers
  • Brake firmness adjustable in four steps; pedal faces adjustable
  • Includes a clutch for H-shifter use
  • Light, mostly plastic base slides on hard floors without a rig
  • Brake is position-based, not a load cell

Watch out: Plugs into the wheel base only (no USB); on hard floors you will want a wheel stand or cockpit.

What it feels like

Stiffness
Progression
Damping
Travel
Noise

The brake is firm but short, with a spring-like and not hydraulic push.

The throttle is light and easy to modulate.

The pedals can slide on a bare floor unless you brace them.

Like a lightweight spring-loaded treadle: you push it and it springs back, but it doesn't have a progressively heavier feel like a real car brake.

What the T3PM (T248 (Xbox)) works with

  • Comes in the box with the Thrustmaster T248 (Xbox/PC); it isn't sold on its own.
  • Plugs into the wheel base; there's no USB cable. It works on whatever platforms the base supports.

Wheel bases it plugs into

Plugged into one of these, it works on the platforms shown.

PartWorks onNoteScore
Thrustmaster T248 (Xbox/PC)In the boxPS5XboxPCIn the box68

Tech facts

Pedals3
Brake sensorHall
Throttle sensorHall
Brake firmness settings4
ConnectionRJ12-style cable to Thrustmaster wheel base
SoftwareThrustmaster driver/control panel (PC); plug and play on Xbox via base
Size (W × D × H)17 × 13 × 8 in (43 × 34 × 21 cm)
Weight6 lb (2.6 kg)
MaterialsPlastic and steel

Our take

AI analysis of public information, not a hands-on review.

The T3PM is the pedal set that comes in the box with the Thrustmaster T248 (Xbox/PC). It isn't a separate purchase for most buyers. It has three pedals (throttle, brake, clutch) with contactless magnetic sensors, which should avoid the wear and drift that potentiometer pedals can develop. That's a real step up from the budget wheel-and-pedal sets in this price tier. The set connects to the wheel base through an RJ12-style cable and has no USB connection or power supply of its own. That keeps desk setup simple, but you can't use these pedals with a different brand's base or a PC without the wheel. The brake is a short-travel, fairly firm spring-style pedal and not a load cell. It rewards consistency more than muscle-memory pressure braking, so expect a less realistic feel than a load-cell upgrade gives you. The plastic-and-metal shell is light, so on a bare floor it can slide unless you fix it to a rig or put it against a wall. For a first rig it's a reasonable starter, and you can replace it later with an aftermarket set if the base supports it.

Questions buyers ask

Can I buy the T3PM pedals separately or use them on another wheel?

They're mainly sold in the T248 box. They connect to a Thrustmaster base through an RJ12-style port, so they won't work as a USB device or with another brand's base. Check compatibility with your specific base first.

Do they need a separate power supply or USB cable?

No. They plug into the back of the wheel base, which supplies power and passes the signal through. You only need the base's own power supply.

Are these pedals load cell, and can I upgrade later?

No, they use magnetic position sensing and not pressure-based load cell braking. If you want a more realistic brake later, you can look at Thrustmaster's own upgrade pedals or aftermarket sets that are compatible with your base. Confirm the connector and compatibility before buying.

63
Fine, with caveatsAI score out of 100

Comes in the box with the Thrustmaster T248 (Xbox/PC) ($279).

Check price at Amazon ↗Check price at Thrustmaster ↗

Affiliate links: we may earn a commission at no cost to you. As an Amazon Associate we earn from qualifying purchases.

Specs not yet checked by hand. Confirm on the brand's page before you buy.

Pairs well with

  • Thrustmaster T-LCM Pedals77

On this page

  1. AI rating
  2. Pros and cons
  3. What it feels like
  4. Works with
  5. Tech facts
  6. Our take
  7. Questions