Simagic · wheel base · 2024
Simagic Alpha EVO Pro (18 Nm)
18 Nm direct-drive base with 21-bit encoder and active cooling, aimed at serious PC sim racers
Simagic's top EVO base: 18 Nm of direct drive for well under $1,000. It delivers most of what Simucube-class bases do for a little over half the price, on PC only.
AI rating
- Force feedback detail
- 9
- Strength
- 8
- Smoothness
- 8
- Ecosystem
- 7
- Quietness
- 7
- Value
- 8
Who it suits
- First rig
- 4
- Console racing
- 0
- Competitive racing
- 9
- Small rooms
- 4
- Tight budgets
- 5
- Enthusiasts
- 8
Scores are AI analysis of public information (specs, manuals, published reviews and owner reports), not a hands-on test. How we rate
Pros and cons
- 18 Nm puts it in high-end territory at a mid-range price
- Same Simagic QR as the cheaper EVO bases, so rims move with you
- Fine detail and fast response suit competitive iRacing and ACC
- Needs a rigid aluminum-profile cockpit to use its torque
- PC only; resale market smaller than Fanatec or Moza
- Power brick and cooling fan add some noise and cable clutter
Watch out: 18 Nm can injure wrists on a crash and will twist a tube cockpit; hard-mount it to an aluminum profile rig and set a sane torque cap.
What it feels like
- Strength
- Detail
- Smoothness
- Noise
- Heat
Strong enough to hold GT3 and open-wheel loads without feeling clipped.
Fine detail comes through with little cogging at low forces.
The fan is audible under sustained load but not loud.
Like going from power steering to a heavy go-kart's unassisted steering: you feel every surface and load.
What the Alpha EVO Pro works with
- Works on PC.
- Sold as a base only: you also need a wheel and pedals.
- Wheels attach with the Simagic quick release.
- There's no pedal port: pedals connect to the PC by USB.
Wheels that fit the Simagic Alpha EVO Pro (18 Nm)
Platforms show where each pairing works.
| Part | Works on | Score |
|---|---|---|
| Simagic GT Neo | PS5XboxPC | 82 |
| Simagic GT4 | PS5XboxPC | 75 |
Pedals that plug into it
These connect through the base's pedal port, so they work on every platform the base supports.
This base has no pedal port.
USB pedals that work with it on PC
These run beside the base over USB. They don't work on console.
- Heusinkveld Ultimate+ (3-pedal) · USB to the PC88
- Asetek Invicta Pedals (2-pedal, hydraulic) · USB to the PC84
- Heusinkveld Sprint (3-pedal) · USB to the PC84
- Moza CRP2 Load Cell Pedals (Throttle + Brake) · USB to the PC82
- Simagic P1000 (3-pedal) · USB to the PC80
- Logitech G PRO Racing Pedals · USB to the PC80
- Fanatec ClubSport Pedals V3 · USB to the PC79
- Asetek Forte Pedals (2-pedal) · USB to the PC79
- Thrustmaster T-LCM Pedals · USB to the PC77
- Fanatec CSL Pedals with Load Cell Kit · USB to the PC76
- Logitech G RS Pedals · USB to the PC76
- Asetek La Prima Pedals (2-pedal) · USB to the PC74
- Fanatec CSL Pedals · USB to the PC60
Shifters and handbrakes
Plugged into the base where noted; the rest connect to a PC by USB.
| Part | Works on | Score |
|---|---|---|
| Heusinkveld Sim Shifter SequentialUSB to the PC | PS5XboxPC | 83 |
| Simagic DS-8X ShifterUSB to the PC | PS5XboxPC | 80 |
| Fanatec ClubSport Shifter SQ V1.5USB to the PC | PS5XboxPC | 78 |
| Thrustmaster TH8A ShifterUSB to the PC | PS5XboxPC | 76 |
| Moza SGP Sequential ShifterUSB to the PC | PS5XboxPC | 74 |
| Moza HGP H-Pattern ShifterUSB to the PC | PS5XboxPC | 71 |
| Thrustmaster TH8S Shifter Add-OnUSB to the PC | PS5XboxPC | 63 |
| Heusinkveld Sim HandbrakeUSB to the PC | PS5XboxPC | 82 |
| Simagic TB-1 HandbrakeUSB to the PC | PS5XboxPC | 76 |
| Fanatec ClubSport Handbrake V2USB to the PC | PS5XboxPC | 72 |
| Moza HBP HandbrakeUSB to the PC | PS5XboxPC | 72 |
| Thrustmaster TSS Handbrake Sparco Mod+USB to the PC | PS5XboxPC | 72 |
Cockpits and stands
With 18 Nm of torque, a frame rated below that flexes and one rated far below it shakes.
Rigs that use it
- Track Day TriplesPC · $6,828
Tech facts
| Drive type | Direct |
|---|---|
| Torque | 18 Nm |
| Rotation | Unlimited |
| Wheel included | No |
| Pedals included | No |
| Mounting | Bolts to a rig |
| Power supply | External power supply (included) |
| Connection | USB to PC |
| Encoder | 21-bit |
| Safety | Check Simagic documentation for the quick-release and emergency-stop setup |
| Quick release | Simagic quick release |
| Size (W × D × H) | 6 × 10 × 6 in (14 × 26 × 16 cm) |
| Weight | 17 lb (7.8 kg) |
| Materials | Aluminum and steel |
| Released | 2024 |
| Platforms | PS5XboxPC |
Our take
AI analysis of public information, not a hands-on review.
The Alpha EVO Pro is Simagic's top 18 Nm base in the EVO line. It uses a 5-pole low-inertia servo motor, a 21-bit encoder and a fan-cooled housing meant to hold full torque without fading. It is compact for its class (about 317 x 130 x 110 mm, 8.6 kg), which helps on tighter rigs. Simagic's FFB is generally described as smooth and detailed, with little cogging.
For a first rig, 18 Nm is more than most people need. The 12 Nm Alpha EVO Sport or a similar base costs less and will feel strong in most cars. The Pro makes sense if you already know you want headroom for GT3 and open-wheel cars and expect to keep the base for years.
Plan for the extras. The base ships without a rim or pedals, so budget for a Simagic quick-release rim and pedals. It is PC-only and needs a rigid aluminum profile or equivalent mount. Simagic's ecosystem is open, but some of its software is less polished than Fanatec's or Moza's. Retailer pricing in the US has been around $699, below the dataset's $849.
Questions buyers ask
Does it work with PlayStation or Xbox?
No. It is a PC-only wheelbase (Windows). Console support isn't offered.
Does it include a steering wheel and pedals?
No. It's the base only. You need a Simagic-compatible quick-release rim and a separate set of pedals, which connect over USB or to Simagic's hub rather than to the base.
Is 18 Nm too much for a first rig?
For most people, yes. The 12 Nm EVO Sport is strong enough for nearly every car. Buy the Pro if you want headroom and have a very rigid rig, because 18 Nm will flex weak desks and cheap stands.